Sara Amidi, 2020-2021, Thermo-Mechanical Characterization of Temperature Resistant Coatings

Simen Ringdahl, 2019-2020, Machine Learning and Atomic Simultations to predict Nanoscale Ice Adhesion

Lene Hollund, 2018-2019, Nanostructuring Cu Surfaces for Efficient CO2 Condensation

Birger Langebro, 2017-2018, Towards Novel Metal-Polymer Interface Thermal Transport Model Systems

Otto Magnus Evenstad, 2016-2017, Two Novel Methods in the Electrical Characterization of Single Metal-Coated Polymer Spheres

Lene Æsøy, 2016-2017, Anti-Icing and De-Icing of Pipe Structures on Marine Vessels using Waste Heat Recovery.

Sunny Islam, 2015-2016, INFLUENCE OF DISSIPATIVE COHESIVE ZONE LAW ON HYDROGEN EMBRITTLEMENT.

Hans-Henning Heyn, 2015-2016, Molecular Dynamics Simulation of nanoindentation of fcc and bcc systems : Influence of hydrogen and vacancies

Bjørn Augdal Dahl, 2015-2016, Effect of Low Temperature Tensile Properties on Crack Driving Force for Arctic Applications.

Jon Oddvar Kolnes, 2014-2015. Fabrication and characterisation of a vertically aligned Forest of Carbon Nanotubes towards a superhydrophobic Surface

Chrisrosemarie Delabahan, 2014-2015. Nano-enabled anti-icing surfaces and coatings

August Emil Tobiesen Stokkeland, 2014-2015. A novel Characterization Method for electric Properties of single Silver-coated Polymer Spheres

Trond Rypdal Henninen, 2013, Improving Reduced Graphene Oxide Paper Using High Energy Electron Irradiation

Christian Kvalsun, 2013-2014.

Vegard Tømmernes, 2013-2014, Implementation of the Arruda-Boyce Material Model for Polymers in Abaqus.

Esam Suleman, 2013, Fracture Mechanics based design of new composite steel pipes.

Elisabeth Tanami Vågenes, 2013-2014, A New Method for Measuring the Ice Adhesion Strength of Anti-Icing Coatings.

Elshan Jabrayilov, 2014, Friction reduction by using nanoparticles in oil-based mud.

Carolin Jahns, 2013-2014, Friction Reduction by using Nano-Fluids in Drilling

Tor Lone Rasmussen, 2012-2013, Effect of non-spherical voids on the mechanical behavior of shape memory alloys.

Frode Aarstad Riveland, 2012-2013, Investigation of Nanoparticles for Enhanced Filtration Properties of Drilling Fluid

Marius Haara Tjemsland, 2013, The effect of nano-silica in oil-well cement

Simen Eidsmo Barder, 2012, Molekylærdynamikk simulering av mekanisk oppførsel til DNA-materialer.

Houyu Zhang, 2011, Fracture of graphene with various defects: A molecular dynamics simulation study.

Kjetil Knausgard, 2011-2012, Superhydrophobic Anti-Ice Nanocoatings.

Emanuele Innocente, 2010, Study of the Sticking Problem on Thin Solar Wafers during Handling and Slurry Wire Saw.

Kristian Pedersen, 2009, Modelling of ductile fracture.

Erik Maastad, 2009, Sawing of silicon wafers for solar application.

Kristian Ivanov, 2008-2009, Modelling Ductile Fracture of Pipeline Steels.

Jorunn Knive Hals, 2008-2009, Constitutive Modelling of Shape Memory Alloys.

Jon Arne Habostad, 2008-2009, Nanomechanics of polymer particles.

Edvin Eimstad Riisem, 2008 2009,  Analysis of forces and deformation of a bridge plug, HPHT 342-450.

Tore Helland, 2007-2008, Experimental and numerical study on the nano-mechanical properties of polymer particles.

Kaja Torpe, 2007-2008, Modelling of ductile fracture of pipeline steels.

Andreas Grytdal, 2007-2008, Feasibility study on extending QuickFlanges technology to pipe connections with large dimensions.

Sigurd Loftheim Dale, 2007, The Finite Element Method in Finance.

Mari Midttun, 2007, Nanomechanical testing and analyses of polymer particles.

Sturla Rasmussen Aam, 2006-2007, Development of an electric discharge machining technique for residual stress determinations in hard materials using the hole drilling method.

Pål Are Eikrem, 2006-2007, Prestrain effect on fracture behaviour of pipeline steels.

Nina Cathrine Johnsrud, 2006-2007, Effect of residual stress on hydrogen Embrittlement.

Lene Eliassen, 2006-2007, Characterization of Mechanical Properties of Carbon Anode Materials.

Heidi Aasen, 2006-2007, Finite Element Analysis of Anode Cracking.

Daniel Kohn, 2006-2007, Influence of time optimized simulation algorithms on residual stresses and distortions of laser weld processes calculated by numerical simulation.

Tarjei K Tellefsen, 2006, Simulation of welding residual stress in pipe joints.

Sverre Eikeland, 2005-2006, Analysis of ductile fracture of welded pipe components.

Jim Stian Olsen, 2005-2006, Seismic dampers with composite NiTi-wires – A new damper system.

Christophe Cornet, 2005, Finite element studies on the effect of plasticity history on fracture behavior of pipes

Håkon Sand, 2004-2005,  UTFORMING AV ROTASJONSLEDD I SMARTE MATERIALER.