Course - Strength Analyses - SKID2201
SKID2201 - Strength Analyses
About
This course is no longer taught and is only available for examination.
Examination arrangement
Examination arrangement: School exam
Grade: Letter grades
Evaluation | Weighting | Duration | Grade deviation | Examination aids |
---|---|---|---|---|
School exam | 100/100 | 5 hours |
Course content
- Bending moment, shear force and normal force distribution
- Static undetermined systems
- Stress analyses
- Load case definition
- Elasto-plastic analyses
- Failure mechanics
- Buckling of pillars and plates
Learning outcome
Knowledge: After completed module, the candidate is to have theoretical basis for the determination of: Bending moments, shear forces and normal force distribution diagrams
- Stress distribution on beam cross sections
- Pillar and plate buckling capacities
- Elasto-plastic conditions of beam systems
Skills: After completed module, the candidate is to have skills in application of:
- Methods for establishing bending moment, shear force and shear force distribution diagrams for static undetermined beam systems
- Manual methods for establishing stress distribution on beam sections
- Use of a digital tool to design beam constructions
- Manual methods for establishing elasto-plastic capacities in a system of beams
- Manual methods for establishing pillar and plate buckling capacities
Competence: After completed module, the candidate shall be competent in:
- Design of static problems with regards to geometry
- Boundary conditions
- Load application and section properties
- Determination of relevant dimensions and acceptance criteria for a static undetermined beam system
Learning methods and activities
Lectures, compulsory theoretical exercises and practical laboratory exercise in groups.
Compulsory assignments
- Oblig
Further on evaluation
Mandatory work requirements: 13 exercises are given, of which 11 are required to be submitted and approved in order to sit for the exam.
Allowed aids at exam: Technical formula books and calculators of own choice
Re-sit exam: Oral examination.
Re-sit exam: following semester.
Recommended previous knowledge
MEKA1001 Mechanics
Course materials
"Fasthetslære" by Fridtjov Irgens.
"Tekniske tabeller" by Jarle Johannessen.
Other tables and procedures are handed out during lectures.
No
Version: 1
Credits:
7.5 SP
Study level: Intermediate course, level II
Language of instruction: Norwegian
-
- Machine Design
- Marine Structures
Department with academic responsibility
Department of Ocean Operations and Civil Engineering
Examination
Examination arrangement: School exam
- Term Status code Evaluation Weighting Examination aids Date Time Examination system Room *
- Autumn ORD School exam 100/100 2024-12-20 09:00 INSPERA
-
Room Building Number of candidates C218 Ankeret/Hovedbygget 35
Examination arrangement: Oral examination (Re-sit Exam)
- Term Status code Evaluation Weighting Examination aids Date Time Examination system Room *
- Spring UTS Oral examination (Re-sit Exam) 100/100
-
Room Building Number of candidates
- * The location (room) for a written examination is published 3 days before examination date. If more than one room is listed, you will find your room at Studentweb.
For more information regarding registration for examination and examination procedures, see "Innsida - Exams"