Course - Electrical circuits - introduction - ELEG1001
ELEG1001 - Electrical circuits - introduction
About
Examination arrangement
Examination arrangement: School exam
Grade: Letter grades
| Evaluation | Weighting | Duration | Grade deviation | Examination aids |
|---|---|---|---|---|
| School exam | 100/100 | 4 hours | H |
Course content
The course provides basic knowledge of circuit analysis for linear physical energy systems. Analysis and measurement of electrical energy circuits is the main focus of the course, but the circuit concept and analysis techniques will also be applicable to other physical domains. The course covers DC circuits, introduces AC signals and simple rectifiers.
Items in the subject:
- Direct current and voltage, resistance, power and energy.
- Component characteristics of as well as circuits with voltage sources, current sources, resistance, inductance, capacitance, switches/diodes, ideal operational amplifier and ground.
- Ohm's law and Kirchhoff 's law current law and voltage law .
- Different methods of linear circuit analysis; for example source transformation, circuit simplifications, node analysis , loop analysis, superposition, as well as Thevenin and Norton equivalent.
- Transient analysis (turn-on and turn-off) in RL, RC and RLC circuits
- Analogies to, as well as application of, the circuit concept and analysis techniques to other physical domains.
- Introduction to alternating current and voltage (AC signals)
- Basic power electronics and non-linear systems: rectifiers and DC converters.
- Reflections on ethics and sustainability in connection with electrical systems and components.
- Brief description of the historical development within circuit theory.
- Hand calculation and simulation/calculation using digital tools.
- Group work, laboratory work and documentation of this.
Some adjustments to the theme and focus may occur, and more detailed information about the syllabus will be made available at the start of the semester.
Learning outcome
The student must understand:
- The basic characteristics of a selection of electrical circuits and understand how electrical circuits can be controlled.
- Understand how the circuit concept can be transferred to other physical domains.
- Safety in the lab, physical circuit connections and troubleshooting, as well as precision and limitations in measuring instruments.
The student must be able to:
- Use network theorems, component characteristics and fundamental laws in electrical circuit theory to calculate parameters in systems with a selection of components.
- Carry out system analyzes using hand calculations and simulations, as well as practical connection and measurement in the lab.
- Connect simple circuits according to given specifications. Measure electrical values using a multimeter and oscilloscope.
- Use various circuit components to create circuits with desired properties.
- Carry out and report group work/laboratory work in technical reports.
After completing the course, the candidate has the general competence to:
- Use basic laws and analysis methods from this subject in later parts of the candidate's studies and in work situations.
- Know Norwegian and English technical terms for methods/techniques, components/ parameters , measuring units etc.
- Use a simulation tool for the analysis of simple energy systems.
- Follow safety instructions for laboratory work.
- Report laboratory work.
Learning methods and activities
The learning activities will be a combination of lectures and student-centered learning activities.
Obligatory activites: Laboratory work and exercises.
Some of the teaching activities may be taught in English.
Compulsory assignments
- Exercises
- Laboratory work
Further on evaluation
If there is a re-sit examination in August, the examination form may change from written to oral.
Specific conditions
Admission to a programme of study is required:
Electrical Engineering (BIELEKTRO)
Renewable Energy - Engineering (BIFOREN)
Course materials
Information about course material will be provided at the beginning of the semester.
Credit reductions
| Course code | Reduction | From | To |
|---|---|---|---|
| ELET1001 | 7.5 | AUTUMN 2023 | |
| ELEA1001 | 7.5 | AUTUMN 2023 | |
| IELEA1001 | 5.0 | AUTUMN 2023 | |
| IELET1001 | 5.0 | AUTUMN 2023 | |
| IELEG1001 | 5.0 | AUTUMN 2023 | |
| IELET2003 | 2.5 | AUTUMN 2023 | |
| IELEA2003 | 2.5 | AUTUMN 2023 | |
| IELEG2003 | 2.5 | AUTUMN 2023 | |
| ELE1051 | 2.5 | AUTUMN 2023 | |
| TELE2002 | 2.5 | AUTUMN 2023 | |
| TTT4203 | 5.0 | AUTUMN 2023 | |
| TTK4240 | 2.5 | AUTUMN 2023 | |
| AIS2001 | 2.5 | AUTUMN 2023 | |
| TFE4101 | 5.0 | AUTUMN 2023 | |
| TFE4100 | 3.0 | AUTUMN 2023 | |
| TFE4105 | 3.0 | AUTUMN 2023 | |
| TFE4110 | 3.0 | AUTUMN 2023 | |
| TFE4112 | 3.0 | AUTUMN 2023 | |
| SIE4002 | 3.0 | AUTUMN 2023 | |
| SIE4003 | 3.0 | AUTUMN 2023 | |
| SIE4005 | 3.0 | AUTUMN 2023 | |
| SIE4006 | 5.0 | AUTUMN 2023 | |
| TPK4125 | 2.5 | AUTUMN 2023 | |
| TTM4190 | 2.5 | AUTUMN 2023 | |
| FENA1201 | 7.5 | AUTUMN 2024 |
No
Version: 1
Credits:
7.5 SP
Study level: Foundation courses, level I
Term no.: 1
Teaching semester: AUTUMN 2024
Language of instruction: Norwegian
Location: Gjøvik
- Electronics
- Electrical Power Engineering
- Electrical Power Engineering
Department with academic responsibility
Department of electric energy
Examination
Examination arrangement: School exam
- Term Status code Evaluation Weighting Examination aids Date Time Examination system Room *
- Autumn ORD School exam 100/100 H 2024-12-19 09:00 INSPERA
-
Room Building Number of candidates M433-Eksamensrom 4.etg Mustad, Inngang A 46 - Summer UTS School exam 100/100 H INSPERA
-
Room Building Number of candidates
- * The location (room) for a written examination is published 3 days before examination date. If more than one room is listed, you will find your room at Studentweb.
For more information regarding registration for examination and examination procedures, see "Innsida - Exams"