Publications - Solidification and Casting - Department of Materials Science and Engineering
Publications
Publications
2016:
Casari, Daniele; Mirihanage, Wajira; Falch, Ken Vidar; Ringdalen, Inga Gudem; Friis, Jesper; Schmid-Fetzer, R; Zhao, Dongdong; Li, Yanjun; Silikens, W.H.; Mathiesen, Ragnvald. (2016) alpha-Mg primary phase formation and dendritic morphology transition in solidification of a Mg-Nd-Gd-Zn-Zr casting alloy. Acta Materialia. vol. 116.
Mudu, Federica; Olsbye, Unni; Arstad, Bjørnar; Diplas, Spyros; Li, Yanjun; Fjellvåg, Helmer. (2016) Aluminium substituted lanthanum based perovskite type oxides, non-stoichiometry and performance in methane partial oxidation by framework oxygen. Applied Catalysis A : General. vol. 523.
Wang, Ning; Huang, Ke; Li, Yanjun; Marthinsen, Knut.
The influence of processing conditions on microchemistry and the softening behavior of cold rolled Al-Mn-Fe-Si alloys. Metals 2016 ;Volum 6:61.(3) http://dx.doi.org/10.3390/met6030061
Zhao, Dongdong; Løvvik, Ole Martin; Marthinsen, Knut; Li, Yanjun. (2016)Impurity effect of Mg on the generalized planar fault energy of Al. Journal of Materials Science. vol. 51 (14).
Zhao, Qinglong; Huang, Ke; Li, Yanjun; Marthinsen, Knut. (2016) Orientation Preference of Recrystallization in Supersaturated Aluminum Alloys Influenced by Concurrent Precipitation. Metallurgical and Materials Transactions. A. vol. 47 (3).
Cheng, Xuemei; Marstein, Erik Stensrud; Haug, Halvard; You, Chang Chuan; Di Sabatino, Marisa. (2016) Thermal stability of hydrogenated amorphous silicon passivation for p-type crystalline silicon. Physica Status Solidi (a) applications and materials science. vol. 213 (1).
Ekstrøm, Kai Erik; Stokkan, Gaute; Autruffe, Antoine; Søndenå, Rune; Dalaker, Halvor; Arnberg, Lars; Di Sabatino, Marisa. (2016) Microstructure of multicrystalline silicon seeded by polysilicon chips and fluidized bed reactor granules. Journal of Crystal Growth. vol. 441.
Ekstrøm, Kai Erik; Undheim, Espen; Stokkan, Gaute; Arnberg, Lars; Di Sabatino, Marisa. (2016) Beta-Si3N4 particles as nucleation sites in multicrystalline silicon. Acta Materialia. vol. 109.
Castellanos, Sergio; Ekstrøm, Kai Erik; Autruffe, Antoine; Jensen, Mallory A.; Morishige, Ashley E.; Hofstetter, Jasmin; Yen, Patricia; Lai, Barry; Stokkan, Gaute; del Cañizo, Carlos; Buonassisi, Tonio. (2016) High-Performance and Traditional Multicrystalline Silicon: Comparing Gettering Responses and Lifetime-Limiting Defects. IEEE Journal of Photovoltaics. vol. 6 (3).
Ekstrøm, Kai Erik; Søndenå, Rune; Autruffe, Antoine; Stokkan, Gaute; Arnberg, Lars; Di Sabatino, Marisa. (2016) The Effect of Phosphorus Gettering on Fine-Grained Multicrystalline Silicon. Proceedings of the European Photovoltaic Solar Energy Conference.
Di Giovanni, Maria Teresa; Cerri, Emanuela; Casari, Daniele; Merlin, Mattia; Arnberg, Lars; Garagnani, Gian luca. (2016) The Influence of Ni and V Trace Elements on High-Temperature Tensile Properties and Aging of A356 Aluminum Foundry Alloy. Metallurgical and Materials Transactions. A.
2015:
Du, Qiang; Li, Yanjun. (2015) Prediction of as-cast grain size of inoculated aluminum alloys melt solidified under non-isothermal conditions. IOP Conference Series: Materials Science and Engineering. vol. 84 (1).
Huang, Ke; Engler, Olaf; Li, Yanjun; Marthinsen, Knut. (2015) Evolution in microstructure and properties during non-isothermal annealing of a cold-rolled Al-Mn-Fe-Si alloy with different microchemistry states. Materials Science & Engineering: A. vol. 628.
Huang, Ke; Li, Yanjun; Marthinsen, Knut. (2015) Effect of heterogeneously distributed pre-existing dispersoids on the recrystallization behavior of a cold-rolled Al-Mn-Fe-Si alloy. Materials Characterization. vol. 102.
Huang, Ke; Li, Yanjun; Marthinsen, Knut. (2015) Factors affecting the strength of P{011}〈566〉-texture after annealing of a cold-rolled Al–Mn–Fe–Si alloy.Journal of Materials Science. vol. 50 (14).
Huang, Ke; Zhao, Qinglong; Li, Yanjun; Marthinsen, Knut.
Two-stage annealing of a cold-rolled Al-Mn-Fe-Si alloy with different microchemistry states. Journal of Materials Processing Technology 2015 ;Volum 221. s. 87-99 10.1016/j.jmatprotec.2015.02.016
Jin, Shenbao; Tao, Nairong; Marthinsen, Knut; Li, Yanjun. (2015) Deformation of an Al-7Mg alloy with extensive structural micro-segregations during dynamic plastic deformation. Materials Science & Engineering: A. vol. 628.
Jin, Shenbao; Zhang, Kai; Bjørge, Ruben; Tao, NR; Marthinsen, Knut; Lu, K; Li, Yanjun. (2015) Formation of incoherent deformation twin boundaries in a coarse-grained Al-7Mg alloy. Applied Physics Letters. vol. 107 (9).
Muggerud, Astrid Marie Flattum; Walmsley, John; Holmestad, Randi; Li, Yanjun. (2015) Combining HAADF STEM tomography and electron diffraction for studies of α-Al(Fe,Mn)Si dispersoids in 3xxx aluminium alloys. Philosophical Magazine. vol. 95 (7).
Wang, Xueli; Xing, Yuan; Huang, Huilan; Li, Yanjun; Jia, Zhihong; Liu, Qing.
Growth Directions of Precipitates in the Al-Si-Mg-Hf Alloy Using Combined EBSD and FIB 3D-Reconstruction Techniques. Microscopy and Microanalysis 2015 ;Volum 21.(3) s. 588-593 10.1017/S1431927615000549
Zha, Min; Li, Yanjun; Mathiesen, Ragnvald; Bjørge, Ruben; Roven, Hans Jørgen. (2015) High ductility bulk nanostructured Al-Mg binary alloy processed by equal channel angular pressing and inter-pass annealing.Scripta Materialia. vol. 105.
Zha, Min; Li, Yanjun; Mathiesen, Ragnvald; Bjørge, Ruben; Roven, Hans Jørgen. (2015) Microstructure evolution and mechanical behavior of a binary Al-7Mg alloy processed by equal-channel angular pressing. Acta Materialia. vol. 84.
Zhao, Qinglong; Holmedal, Bjørn; Li, Yanjun; Sagvolden, Espen; Løvvik, Ole Martin. (2015) Multi-component solid solution and cluster hardening of Al-Mn-Si alloys. Materials Science & Engineering: A. vol. 625 (Febr).
Autruffe, Antoine; Hagen, Vegard Stenhjem; Arnberg, Lars; Di Sabatino, Marisa. (2015) Dislocation generation at near-coincidence site lattice grain boundaries during silicon directional solidification. Journal of Crystal Growth. vol. 411.
Autruffe, Antoine; Kivambe, Maulid Mohamed; Arnberg, Lars; Di Sabatino, Marisa. (2015) The impact of oxygen precipitation on dislocation generation at small angle grain boundaries during seed-assisted directional solidification. Physica Status Solidi (a) applications and materials science. vol. 213 (1).
Autruffe, Antoine; Stenhjem Hagen, Vegard; Arnberg, Lars; Di Sabatino, Marisa. (2015) Dislocation generation at near-coincidence site grain boundaries during silicon directional solidification. Journal of Crystal Growth. vol. 411.
Autruffe, Antoine; Vines, Lasse; Arnberg, Lars; Di Sabatino, Marisa. (2015)Coincident site lattice bi-crystals growth - Impurity segregation towards grain boundaries. Journal of Crystal Growth. vol. 416.
Ceschini, Lorella; Morri, Alessandro; Morri, Andrea; Di Sabatino, Marisa.(2015) Effect of thermal exposure on the residual hardness and tensile properties of the EN AW-2618A piston alloy. Materials Science & Engineering: A. vol. 639.
Ekstrøm, Kai Erik; Stokkan, Gaute; Søndenå, Rune; Dalaker, Halvor; Lehmann, T; Arnberg, Lars; Di Sabatino, Marisa. (2015) Structure and dislocation development in mono-like silicon. Physica Status Solidi (a) applications and materials science. vol. 212 (10).
Gaspar, Guilherme Manuel Morais; Juel, Mari; Søndenå, Rune; Pascoa, Soraia Sofia; Di Sabatino, Marisa; Arnberg, Lars; Øvrelid, Eivind Johannes. (2015)On the shape of n-type Czochralski silicon top ingots. Journal of Crystal Growth. vol. 418.
Gaspar, Guilherme Manuel Morais; Modanese, Chiara; Schøn, Hendrik; Di Sabatino, Marisa; Arnberg, Lars; Øvrelid, Eivind Johannes. (2015) Influence of Copper Diffusion on Lifetime Degradation in n-type Czochralski Silicon for Solar Cells. Energy Procedia. vol. 77.
Modanese, Chiara; Arnberg, Lars; Di Sabatino, Marisa. (2015) Methodology to analyse small silicon samples by glow discharge mass spectroscopy using thin wafer mask. MethodsX. vol. 2.
Zhang, Song; Modanese, Chiara; Di Sabatino, Marisa; Tranell, Gabriella. (2015)Temperature-dependent Hall effect measurements on Cz-grown silicon pulled from compensated and recycled feedstock materials. Journal of Crystal Growth. vol. 429.
Adamane, Anil Chandra Ramesh; Arnberg, Lars; Fiorese, Elena; Timelli, Giulio; Bonollo, Franco. (2015) Influence of injection parameters on the porosity and tensile properties of high-pressure die cast Al-Si alloys: A review.International Journal of metalcasting. vol. 9 (1).
Boulfrad, Yacine; Haarahiltunen, Antti; Savin, Hele; Øvrelid, Eivind Johannes; Arnberg, Lars. (2015) Enhanced performance in the deteriorated area of multicrystalline silicon wafers by internal gettering. Progress in Photovoltaics. vol. 23 (1).
Casari, Daniele; Ludwig, Thomas Hartmut; Merlin, Mattia; Arnberg, Lars; Garagnani, Gian Luca. (2015) Impact Behavior of A356 Foundry Alloys in the Presence of Trace Elements Ni and V. Journal of materials engineering and performance (Print). vol. 24 (2).
Ekstrøm, Kai Erik; Stokkan, Gaute; Søndenå, Rune; Dalaker, Halvor; Lehmann, T; Arnberg, Lars; Di Sabatino, Marisa. (2015) Structure and dislocation development in mono-like silicon. Physica Status Solidi (a) applications and materials science. vol. 212 (10).
Fiorese, Elena; Bonollo, Franco; Timelli, Giulio; Arnberg, Lars; Gariboldi, E..(2015) New classification of defects and imperfections for aluminum alloy castings. International Journal of metalcasting. vol. 9 (1).
Li, JH; Wang, XD; Ludwig, Thomas Hartmut; Tsunekawa, Y; Arnberg, Lars; Jiang, J.Z.; Schumacher, P. (2015) Modification of eutectic Si in Al-Si alloys with Eu addition. Acta Materialia. vol. 84.
Li, Yanjun; Xu, Yijiang; Du, Qiang; Arnberg, Lars; Mathiesen, Ragnvald. (2015)Numerical modelling and in-situ radiographic study of the grain nucleation and growth of inoculated aluminum alloys. IOP Conference Series: Materials Science and Engineering. vol. 84 (1).
Ludwig, Thomas Hartmut; Li, Jiehua; Shaffer, Paul; Schumacher, Peter; Arnberg, Lars. (2015) Refinement of eutectic Si in high purity Al-5Si alloys with combined Ca and P additions. Metallurgical and Materials Transactions. A. vol. 46 (1).
Modanese, Chiara; Arnberg, Lars; Di Sabatino, Marisa. (2015) Methodology to analyse small silicon samples by glow discharge mass spectroscopy using thin wafer mask. MethodsX. vol. 2.
Tabeshian, Ali; Persson, Dan; Arnberg, Lars; Aune, Ragnhild Elizabeth. (2015)Corrosion behaviour of bulk amorphous and crystalline Zr-based alloys in simulated body fluid with and without additions of protein. Materials and corrosion - Werkstoffe und Korrosion.
Xu, Yijiang; Du, Qiang; Li, Yanjun. (2015) Influence of Dendritic Growth of Equiaxed Grains on As-Cast Grain Size Prediction of Inoculated Aluminum Alloys. Transactions of the Indian Institute of Metals. vol. 68 (6).
2014:
Chen, Lei; Wang, Hui-Yuan; Li, Yanjun; Zha, Min; Jiang, Qichuan. (2014)Morphology and size control of octahedral and cubic primary Mg2Si in an Mg-Si system by regulating Sr contents. CrysteEngComm. vol. 16 (3).
Chen, Yongjun; Li, Yanjun; Xu, X.J.; Hjelen, Jarle; Roven, Hans Jørgen. (2014)Novel deformation structures of pure titanium induced by room temperature equal channel angular pressing. Materials letters (General ed.).vol. 117.
Du, Qiang; Li, Yanjun. (2014) An extension of the Kampmann-Wagner numerical model towards as-cast grain size prediction of multicomponent aluminum alloys. Acta Materialia. vol. 71.
Du, Qiang; Li, Yanjun.
Effect modeling of Cr and Zn on microstructure evolution during homogenization heat treatment of AA3xxx alloys. Transactions of Nonferrous Metals Society of China2014 ;Volum 24.(7) s. 2145-2149 10.1016/S1003-6326(14)63325-2
Du, Qiang; Li, Yanjun.
Prediction of as-cast grain size of inoculated multicomponent aluminum alloys. Materials Science Forum 2014 ;Volum 790-791. s. 185-190 10.4028/www.scientific.net/MSF.790-791.185
Huang, Ke; Li, Yanjun; Marthinsen, Knut.
Isothermal and non-isothermal annealing of cold-rolled Al-Mn-Fe-Si alloys with different microchemistry states. Materials Science Forum 2014 ;Volum 783-786. s. 174-179
10.4028/www.scientific.net/MSF.783-786.174
Huang, Ke; Li, Yanjun; Marthinsen, Knut.
Isothermal annealing of cold-rolled Al−Mn−Fe−Si alloy with different microchemistry states. Transactions of Nonferrous Metals Society of China 2014 ;Volum 24.(12) s. 3840-3847 10.1016/S1003-6326(14)63541-X
Huang, Ke; Li, Yanjun; Marthinsen, Knut.
Microstructural evolution during isothermal annealing of a cold-rolled Al-Mn-Fe-Si alloy with different microchemistry states. Materials Science Forum 2014 ;Volum 794-796. s. 1163-1168 10.4028/www.scientific.net/MSF.794-796.1163
Huang, Ke; Wang, Ning; Li, Yanjun; Marthinsen, Knut. (2014) The influence of microchemistry on the softening behaviour of two cold-rolled Al-Mn-Fe-Si alloys. Materials Science & Engineering: A. vol. 601.
Li, Yanjun; Du, Qiang.
Addressing the influence of solute diffusion layer in solidification front in as-cast grain size prediction models. Materials Science Forum 2014 ;Volum 790-791. s. 179-184 10.4028/www.scientific.net/MSF.790-791.179
Løvvik, Ole Martin; Sagvolden, Espen; Li, Yanjun. (2014) Prediction of solute diffusivity in Al assisted by first-principles molecular dynamics. Journal of Physics: Condensed Matter. vol. 26 (2).
Mirihanage, Wajira; Falch, Ken Vidar; Snigireva, Irina; Snigirev, A; Li, Yanjun; Arnberg, Lars; Mathiesen, Ragnvald. (2014) Retrieval of three-dimensional spatial information from fast in situ two-dimensional synchrotron radiography of solidification microstructure evolution. Acta Materialia. vol. 81.
Muggerud, Astrid Marie F; Li, Yanjun; Holmestad, Randi. (2014) Composition and orientation relationships of constituent particles in 3xxx aluminum alloys. Philosophical Magazine. vol. 94 (6).
Muggerud, Astrid Marie Flattum; Li, Yanjun; Holmestad, Randi.
Orientation studies of á-Al(Fe,Mn)Si dispersoids in 6xxx Al alloys. Materials Science Forum 2014 ;Volum 794-796. s. 39-44 10.4028/www.scientific.net/MSF.794-796.39
Muggerud, Astrid Marie Flattum; Li, Yanjun; Holmestad, Randi; Andersen, Sigmund Jarle.
Mackay icosahedron explaining orientation relationship of dispersoids in aluminium alloys. Acta Crystallographica Section B: Structural Science 2014 ;Volum 70.(5) s. 888-896 10.1107/S2052520614017880
Zha, Min; Li, Yanjun; Mathiesen, Ragnvald; Baumgart, Christine; Roven, Hans Jørgen.
Influence on Mg content, grain size and strain rate on mechanical properties and DSA behaviour of Al-Mg alloys processed by ECAP and annealing. Materials Science Forum 2014 ;Volum 794-796. s. 520-525 10.4028/www.scientific.net/MSF.794-796.520
Zha, Min; Li, Yanjun; Mathiesen, Ragnvald; Bjørge, Ruben; Roven, Hans Jørgen. (2014) Achieve high ductility and strength in an Al-Mg alloy by severe plastic deformation combined with inter-pass annealing. Materials Science & Engineering: A. vol. 598.
Zha, Min; Li, Yanjun; Mathiesen, Ragnvald; Bjørge, Ruben; Roven, Hans Jørgen.
Microstructure, hardness evolution and thermal stability of binary Al-7Mg alloy processed by ECAP with intermediate annealing. Transactions of Nonferrous Metals Society of China 2014 ;Volum 24.(7) s. 2301-2306 10.1016/S1003-6326(14)63348-3
Zha, Min; Li, Yanjun; Mathiesen, Ragnvald; Roven, Hans. (2014) Dispersion of soft Bi particles and grain refinement of matrix in an Al-Bi alloy by equal channel angular pressing. Journal of Alloys and Compounds. vol. 605.
Autruffe, Antoine; Friis, Jesper; Vines, Lasse; Arnberg, Lars; Di Sabatino, Marisa. (2014) Identification of grain boundary segregation mechanisms during silicon bi-crystal solidification. Materials Science Forum. vol. 790-791.
Autruffe, Antoine; Søndenå, Rune; Vines, Lasse; Arnberg, Lars; Di Sabatino, Marisa. (2014) Influence of pulling rate on multicrystalline silicon ingots' properties. Journal of Crystal Growth. vol. 386.
Di Sabatino, Marisa. (2014) Detection limits for glow discharge mass spectrometry (GDMS) analyses of impurities in solar cell silicon.Measurement. vol. 50 (1).
Di Sabatino, Marisa; Modanese, Chiara; Arnberg, Lars. (2014) Depth profile analysis of solar cell silicon by GD-MS. Journal of Analytical Atomic Spectrometry. vol. 29 (11).
Knörlein, Micael; Autruffe, Antoine; Søndenå, Rune; Di Sabatino, Marisa.(2014) Internal Gettering of Iron at Extended Defects. Energy Procedia. vol. 55.
Adamane, Anil Chandra Ramesh; Fiorese, Elena; Timelli, Giulio; Bonollo, Franco; Arnberg, Lars.
Reference dies for the evaluation of tensile properties of gravity cast Al-Si alloys: An overview. Materials Science Forum 2014 ;Volum 794-796. s. 71-76 10.4028/www.scientific.net/MSF.794-796.71
Casari, Daniele; Ludwig, Thomas Hartmut; Merlin, M; Arnberg, Lars; Garagnani, GL.
The effect of Ni and V trace elements on the mechanical properties of A356 aluminium foundry alloy in as-cast and T6 heat treated conditions. Materials Science & Engineering: A 2014 ;Volum 610. s. 414-426 10.1016/j.msea.2014.05.059
Li, Jie Hua; Albu, Mihaela; Ludwig, Thomas Hartmut; Matsubara, Y.; Hofer, Ferdinand; Arnberg, Lars; Tsunekawa, Y; Schumacher, P.
Modification of eutectic Si in Al-Si based alloys. Materials Science Forum 2014 ;Volum 794-796. s. 130-136 10.4028/www.scientific.net/MSF.794-796.130
Liotti, E; Lui, A; Vincent, R.; Kumar, S; Guo, Z; Connolley, T; Dolbnya, I.P.; Hart, M; Arnberg, Lars; Mathiesen, Ragnvald; Grant, P. S..
A synchrotron X-ray radiography study of dendrite fragmentation induced by a pulsed electromagnetic field in an Al-15Cu alloy. Acta Materialia 2014 ;Volum 70. s. 228-239 10.1016/j.actamat.2014.02.024
Ludwig, Thomas Hartmut; Schonhovd Dæhlen, Elin; Schaffer, Paul; Arnberg, Lars.
The effect of Ca and P interaction on the Al–Si eutectic in a hypoeutectic Al–Si alloy. Journal of Alloys and Compounds 2014 ;Volum 586.(Feb) s. 180-190 10.1016/j.jallcom.2013.09.127
Mirihanage, Wajira; Di Michel, Marco; Reiten, Andreas; Arnberg, Lars; Dong, Hongbiao; Mathiesen, Ragnvald.
Time-resolved X-ray diffraction studies of solidification microstructure evolution in welding. Acta Materialia 2014 ;Volum 68. s. 159-168 10.1016/j.actamat.2014.01.040
Mirihanage, Wajira; Falch, Ken Vidar; Snigireva, Irina; Snigirev, A; Li, Yanjun; Arnberg, Lars; Mathiesen, Ragnvald.
Retrieval of three-dimensional spatial information from fast in situ two-dimensional synchrotron radiography of solidification microstructure evolution. Acta Materialia2014 ;Volum 81. s. 241-247 10.1016/j.actamat.2014.08.016
Modanese, Chiara; Arnberg, Lars; Di Sabatino, Marisa.
Analysis of impurities with inhomogeneous distribution in multicrystalline solar cell silicon by glow discharge mass spectrometry. Materials Science & Engineering: B. Solid-state Materials for Advanced Technology 2014 ;Volum 180.(1) s. 27-32 10.1016/j.mseb.2013.10.010
Modanese, Chiara; Gaspar, Guilherme Manuel Morais; Arnberg, Lars; Di Sabatino, Marisa.
On copper diffusion in silicon measured by glow discharge mass spectrometry. Analytical and Bioanalytical Chemistry 2014 ;Volum 406.(29) s. 7455-7462 10.1007/s00216-014-8105-0
2013:
Josefsson, Gabriella; Tanem, Bjørn Steinar; Li, Yanjun; Vullum, Per Erik; Gamstedt, E. Kristofer. (2013) Prediction of elastic properties of nanofibrillated cellulose from micromechanical modeling and nano-structure characterization by transmission electron microscopy. Cellulose (London). vol. 20 (2).
Muggerud, Astrid Marie F; Mørtsell, Eva Anne; Li, Yanjun; Holmestad, Randi.(2013) Dispersoid strengthening in AA3xxx alloys with varying Mn and Si content during annealing at low temperatures,. Materials Science & Engineering: A. vol. 567.
Yao, D; Qiu, Feng; Jiang, Q; Li, Yanjun; Arnberg, Lars. (2013) EFFECT OF LANTHANUM ON GRAIN REFINEMENT OF CASTING ALUMINUM-COPPER ALLOY. International Journal of metalcasting. vol. 7 (1).
Zha, Min; Li, Yanjun; Mathiesen, Ragnvald; Bjørge, Ruben; Roven, Hans Jørgen. (2013) Annealing response of binary Al-7Mg alloy deformed by equal channel angular pressing. Materials Science & Engineering: A. vol. 586.
Zhao, Qinglong; Holmedal, Bjørn; Li, Yanjun. (2013) Influence of dispersoids on microstructure evolution and work hardening of aluminium alloys during tension and cold rolling. Philosophical Magazine. vol. 93 (22).
Zhou, Dongshuai; Jin, Shenbao; Li, Yanjun; Qiu, Feng; Deng, Fan; Wang, Jinguo; Jiang, Qichuan. (2013) Effect of stoichiometry on the surface energies of {100} and {111} and the crystal shape of TiCx and TiNx.CrysteEngComm. vol. 15 (4).
Di Sabatino Lundberg, Marisa; Stokkan, Gaute.
Defect generation, advanced crystallization, and characterization methods for high-quality solar-cell silicon. Physica Status Solidi (a) applications and materials science2013 ;Volum 210.(4) s. 641-648 10.1002/pssa.201200639
Akhtar, Shahid; Shahikh, Raibu; Aune, Ragnhild Elizabeth; Arnberg, Lars.
Mechanism of micro porosity in directionally solidified castings doped with anodised plates and sintered aluminium. International Foundry Research : Giessereiforschung 2013 ;Volum 65.(3) s. 2-11 http://www.international-foundry-research.com/html/01about.html
Autruffe, Antoine; Vines, Lasse; Arnberg, Lars; Di Sabatino Lundberg, Marisa.
Impact of growth rate on impurities segregation at grain boundaries in silicon during Bridgman growth. Journal of Crystal Growth 2013 ;Volum 372. s. 180-188 10.1016/j.jcrysgro.2013.03.037
Hu, Yu; Schøn, Hendrik; Arnberg, Lars.
Characterization of defect patterns in Cz silicon slabs by carrier density imaging. Journal of Crystal Growth 2013 ;Volum 368. s. 6-10 10.1016/j.jcrysgro.2012.12.029
Liotti, E; Lui, A; Vincent, R.; Kumar, S.; Guo, Z; Connolley, T; Hart, M; Arnberg, Lars; Mathiesen, Ragnvald; Grant, P.S..
A Synchrotron X-ray Radiography Investigation of Induced Dendrite Fragmentation in Al-15wt%Cu. Materials Science Forum 2013 ;Volum 765. s. 210-214 10.4028/www.scientific.net/MSF.765.210
Ludwig, Thomas Hartmut; Schaffer, Paul Louis; Arnberg, Lars.
Influence of Phosphorus on the Nucleation of Eutectic Silicon in Al-Si Alloys. Metallurgical and Materials Transactions. A 2013 ;Volum 44A.(13) s. 5796-5805 10.1007/s11661-013-1945-y
Ludwig, Thomas Hartmut; Schaffer, Paul Louis; Arnberg, Lars.
Influence of Some Trace Elements on Solidification Path and Microstructure of Al-Si Foundry Alloys. Metallurgical and Materials Transactions. A 2013 ;Volum 44A.(8) s. 3783-3796 10.1007/s11661-013-1694-y
Ludwig, Thomas Hartmut; Schaffer, Paul Louis; Arnberg, Lars.
Influence of Vanadium on the Microstructure of A356 Foundry Alloy. Light Metals 2013 ;Volum 2013. s. 1023-1028 10.1002/9781118663189.ch173
Modanese, Chiara; Acciarri, Maurizio; Binetti, Simona; Søiland, Anne-Karin; Di Sabatino Lundberg, Marisa; Arnberg, Lars.
Temperature-dependent Hall-effect measurements of p-type multicrystalline compensated solar grade silicon. Progress in Photovoltaics 2013 ;Volum 21.(7) s. 1469-1477 10.1002/pip.2223
Nærland, Tine Uberg; Haug, Halvard; Angelskår, Hallvard; Søndenå, Rune; Marstein, Erik Stensrud; Arnberg, Lars.
Studying light-induced degradation by lifetime decay analysis: Excellent fit to solution of simple second-order rate equation. IEEE Journal of Photovoltaics 2013 ;Volum 3.(4) s. 1265-1270 10.1109/JPHOTOV.2013.2278663
2012:
Chen, Yongjun; Li, Yanjun; Walmsley, John; Gao, N; Roven, Hans Jørgen; Starink, MJ; Langdon, TG. (2012) Microstructural heterogeneity in hexagonal close-packed pure Ti processed by high-pressure torsion.Journal of Materials Science. vol. 47 (12).
Fjeldbo, Snorre Kjørstad; Li, Yanjun; Marthinsen, Knut; Furu, Trond. (2012)Through-process sensitivity analysis on the effect of process variables on strength in extruded Al-Mg-Si alloys. Journal of Materials Processing Technology. vol. 212 (1).
Jin, Shenbao; Shen, Ping; Li, Yanjun; Zhou, Dongshuai; Jiang, Qichuan.
Synthesis of spherical NbB2-x particles by controlling the stoichiometry. CrysteEngComm 2012 ;Volum 14.(6) s. 1925-1928 10.1039/c2ce06436g
Li, Yanjun; Muggerud, Astrid Marie F; Furu, Trond; Olsen, Arne. (2012)Precipitation of partially coherent alpha-Al(Mn,Fe)Si dispersoids and their strengthening effect in AA 3003 alloy. Acta Materialia. vol. 60 (3).
Li, Yanjun; Zhang, WZ; Marthinsen, Knut. (2012) Precipitation crystallography of plate-shaped Al-6(Mn,Fe) dispersoids in AA5182 alloy. Acta Materialia.vol. 60 (17).
Wang, Ning; Flatøy, Jarl Erik; Li, Yanjun; Marthinsen, Knut.
Evolution in microstructure and mechanical properties during back-annealing of AlMnFeSi alloy. Transactions of Nonferrous Metals Society of China 2012 ;Volum 22.(8) s. 1878-1883 10.1016/S1003-6326(11)61401-5
Yao, Dongming; Bai, Zhihao; Qiu, Feng; Li, Yanjun; Jiang, Qichuan.
Effects of La on the age hardening behavior and precipitation kinetics in the cast Al-Cu alloy. Journal of Alloys and Compounds 2012 ;Volum 540. s. 154-158 10.1016/j.jallcom.2012.06.089
Arnberg, Lars; Di Sabatino Lundberg, Marisa; Øvrelid, Eivind Johannes.
Solidification of Silicon for Solar Cells. Transactions of the Indian Institute of Metals 2012 ;Volum 65.(6) s. 509-513 10.1007/s12666-012-0165-2
Arnberg, Lars; Di Sabatino Lundberg, Marisa; Øvrelid, Eivind Johannes.
State-of-the-art growth of silicon for PV applications. Journal of Crystal Growth 2012 ;Volum 360. s. 56-60 10.1016/j.jcrysgro.2012.03.024
Bernardis, Sarah; Newman, Bonna K.; Di Sabatino Lundberg, Marisa; Fakra, Sirine C.; Mariana, Bertini I.; Fenning, David P.; B. Larsen, Rune; Buonassisi, Tonio.
Synchrotron-based microprobe investigation of impurities in raw quartz-bearing and carbon-bearing feedstock materials for photovoltaic application. Progress in Photovoltaics 2012 ;Volum 20.(2) s. 217-225 10.1002/pip.1126
Dal Martello, Elena; Bernardis, Sarah; Larsen, RB; Tranell, Gabriella; Di Sabatino Lundberg, Marisa; Arnberg, Lars.
Electrical fragmentation as a novel route for the refinement of quartz raw materials for trace mineral impurities. Powder Technology 2012 ;Volum 224. s. 209-216 10.1016/j.powtec.2012.02.055
Dispinar, Derya; Akhtar, Shahid; Nordmark, Arne; Syvertsen, Freddy; Di Sabatino Lundberg, Marisa; Arnberg, Lars.
Correlation Between Mechanical Properties and Porosity Distribution of A356 in Gravity Die Casting and Low Pressure Die Casting. Advanced Materials Research2012 ;Volum 445. s. 283-288
10.4028/www.scientific.net/AMR.445.283
Hystad, Marit Elise; Modanese, Chiara; Di Sabatino Lundberg, Marisa; Arnberg, Lars.
Distribution and impact of chromium in compensated solar grade silicon. Solar Energy Materials and Solar Cells 2012 ;Volum 103. s. 140-146 10.1016/j.solmat.2012.04.033
Ludwig, Thomas Hartmut; Di Sabatino Lundberg, Marisa; Arnberg, Lars; Dispinar, Derya.
INFLUENCE OF OXIDE ADDITIONS ON THE POROSITY DEVELOPMENT AND MECHANICAL PROPERTIES OF A356 ALUMINIUM ALLOY CASTINGS.International Journal of metalcasting 2012 ;Volum 6.(2) s. 41-50
Modanese, Chiara; Di Sabatino Lundberg, Marisa; Syvertsen, Martin; Arnberg, Lars.
Chemical bulk properties of multicrystalline silicon ingots for solar cells cast in silicon nitride crucibles. Journal of Crystal Growth 2012 ;Volum 354.(1) s. 27-33 10.1016/j.jcrysgro.2012.05.033
Brynjulfsen, Ingvild Margrete; Arnberg, Lars; Autruffe, Antoine.
Nucleation in small scale multicrystalline silicon ingots. Journal of Crystal Growth 2012 ;Volum 361. s. 206-211 10.1016/j.jcrysgro.2012.09.045
Brynjulfsen, Ingvild Margrete; Fujiwara, K; Usami, N.; Arnberg, Lars.
Growth velocity and grain size of multicrystalline solar cell silicon. Journal of Crystal Growth 2012 ;Volum 356. s. 17-21 10.1016/j.jcrysgro.2012.06.040
Hu, Yu; Schøn, Hendrik; Nielsen, Øyvind; Øvrelid, Eivind Johannes; Arnberg, Lars.
Investigating minority carrier trapping in n-type Cz silicon by transient photoconductance measurements. Journal of Applied Physics 2012 ;Volum 111.(5) s. - 10.1063/1.3689786
Hu, Yu; Schøn, Hendrik; Øvrelid, Eivind Johannes; Nielsen, Øyvind; Arnberg, Lars.
Investigating thermal donors in n-type Cz silicon with carrier density imaging. AIP Advances 2012 ;Volum 2.(3) s. - 10.1063/1.4754276
Jia, Zhihong; Couzinie, JP; Cherdoudi, N; Guillot, I; Arnberg, Lars; Åsholt, Petter; Brusethaug, Stig; Barlas, Bruno; Massinon, D.
Precipitation behaviour of Al3Zr precipitate in Al-Cu-Zr and Al-Cu-Zr-Ti-V alloys. Transactions of Nonferrous Metals Society of China 2012 ;Volum 22.(8) s. 1860-1865 10.1016/S1003-6326(11)61398-8
Ludwig, Thomas Hartmut; Akhtar, Shahid; Dispinar, Derya; Arnberg, Lars.
Einfluss von Oxid- und Wasserstoffgehalt auf die Qualitätmessung von Aluminiumschmelzen. Giesserei-Praxis 2012 ;Volum 9. s. 367-374
Mathiesen, Ragnvald; Arnberg, Lars; Nguyen-Thi, H; Billia, B.
In situ X-ray video microscopy as a tool in solidification science. JOM: The Member Journal of TMS 2012 ;Volum 64.(1) s. 76-82 10.1007/s11837-011-0213-0
Mirihanage, Wajira; Arnberg, Lars; Mathiesen, Ragnvald.
In-situ observation of transient columnar dendrite growth in the presence of thermo-solutal convection. IOP Conference Series: Materials Science and Engineering2012 ;Volum 33. 10.1088/1757-899X/33/1/011001
Modanese, Chiara; Di Sabatino Lundberg, Marisa; Syvertsen, Martin; Arnberg, Lars.
Chemical bulk properties of multicrystalline silicon ingots for solar cells cast in silicon nitride crucibles. Journal of Crystal Growth 2012 ;Volum 354.(1) s. 27-33 10.1016/j.jcrysgro.2012.05.033
Nguyen-Thi, H; Salvo, L; Mathiesen, Ragnvald; Arnberg, Lars; Billia, B; Suery, M; Reinhart, G.
On the interest of synchrotron X-ray imaging for the study of solidification in metallic alloys. Comptes rendus. Physique 2012 ;Volum 13.(3) s. 237-245 10.1016/j.crhy.2011.11.010
2011:
Chen, Yongjun; Li, Yanjun; Walmsley, John; Dumoulin, Stephane; Subbarayan, Sapthagireesh; Armada Nieto, Sergio; Skaret, Pål Christian; Roven, Hans Jørgen. (2011) Quantitative analysis of grain refinement in titanium during equal channel angular pressing. Scripta Materialia. vol. 64 (9).
Mathiesen, Ragnvald; Arnberg, Lars; Li, Yanjun; Meier, Vivienne; Schaffer, Paul; Snigireva, Irina; Snigirev, Anatoly; Dahle, Arne Kristian. (2011) X-Ray Videomicroscopy Studies of Eutectic Al-Si Solidification in Al-Si-Cu.Metallurgical and Materials Transactions. A. vol. 42A (1).
Arnberg, Lars; Di Sabatino Lundberg, Marisa; Øvrelid, Eivind Johannes.
Solidification of Silicon for Electronic and Solar Applications. JOM: The Member Journal of TMS 2011 ;Volum 63.(10) s. 38-42 10.1007/s11837-011-0173-4
Di Sabatino Lundberg, Marisa; Binetti, Simona; Libal, Joris; Acciarri, Maurizio; Nordmark, Heidi; Øvrelid, Eivind Johannes.
Oxygen distribution on a multicrystalline silicon ingot grown from upgraded metallurgical silicon. Solar Energy Materials and Solar Cells 2011 ;Volum 95.(2) s. 529-533 10.1016/j.solmat.2010.09.013
Di Sabatino Lundberg, Marisa; Dons, Anne Lise; Hinrichs, Joachim; Arnberg, Lars.
Determination of relative sensitivity factors for trace element analysis of solar cell silicon by fast-flow glow discharge mass spectrometry. Spectrochimica Acta Part B - Atomic Spectroscopy 2011 ;Volum 66.(2) s. 144-148 10.1016/j.sab.2011.01.004
Modanese, Chiara; Di Sabatino Lundberg, Marisa; Søiland, Anne-Karin; Arnberg, Lars.
Relationship between net doping density and resistivity of compensated mc-Si ingots. Physica Status Solidi. C, Current topics in solid state physics 2011 ;Volum 8.(3) s. 713-716 10.1002/pssc.201000210
Modanese, Chiara; Di Sabatino Lundberg, Marisa; Søiland, Anne-Karin; Peter, Kristian; Arnberg, Lars.
Investigation of bulk and solar cell properties of ingots cast from compensated solar grade silicon. Progress in Photovoltaics 2011 ;Volum 19.(1) s. 45-53 10.1002/pip.986
Bellmann, Martin Pawel; Kaden, Thomas; Kressner-Kiel, D; Friedl, J; Möller, HJ; Arnberg, Lars.
The impact of germanium doping on the dislocation distribution in directional solidified mc-silicon. Journal of Crystal Growth 2011 ;Volum 325.(1) s. 1-4 10.1016/j.jcrysgro.2011.04.038
Bellmann, Martin Pawel; Meese, Ernst Arne; Arnberg, Lars.
Effect of accelerated crucible rotation on the segregation of impurities in vertical Bridgman growth of multi-crystalline silicon. Journal of Crystal Growth 2011 ;Volum 318.(1) s. 239-243
10.1016/j.jcrysgro.2010.10.069
Bellmann, Martin Pawel; Meese, Ernst Arne; Syvertsen, Martin; Solheim, A; Sørheim, H.; Arnberg, Lars.
Silica versus silicon nitride crucible: Influence of thermophysical properties on the solidification of multi-crystalline silicon by Bridgman technique. Journal of Crystal Growth 2011 ;Volum 318.(1) s. 265-268 10.1016/j.jcrysgro.2010.10.073
Boulfrad, Yacine; Stokkan, Gaute; M'hamdi, Mohammed; Øvrelid, Eivind Johannes; Arnberg, Lars.
Modeling of lifetime distribution in a multicrystalline silicon ingot. Solid State Phenomena 2011 ;Volum 178-179. s. 507-512
10.4028/www.scientific.net/SSP.178-179.507
Brynjulfsen, Ingvild; Arnberg, Lars.
Nucleation of silicon on Si3N4 coated SiO2. Journal of Crystal Growth 2011 ;Volum 331.(1) s. 64-67 10.1016/j.jcrysgro.2011.07.003
Dal Martello, Elena; Tranell, Gabriella; Gaal, Sean; Raaness, Ola S.; Tang, Kai; Arnberg, Lars.
Study of pellets and lumps as raw materials in silicon production from quartz and silicon carbide. Metallurgical and materials transactions. B, process metallurgy and materials processing science 2011 ;Volum 42.(5) s. 939-950 10.1007/s11663-011-9529-y
Dal Martello, Elena; Tranell, Gabriella; Raaness, Ola S.; Arnberg, Lars.
Combined XRD and XRF Technique for the Quantification of the Mass Balance in a Si Carbothermic Production Experiment. ISIJ International 2011 ;Volum 51.(9) s. 1492-1496
doi:10.2355/isijinternational.51.1492
Nærland, Tine Uberg; Olaisen, Birger Retterstøl; Arnberg, Lars.
Studying light soaking of solar cells by the use of solar simulator. Solid State Phenomena 2011 ;Volum 178-179. s. 435-440 10.4028/www.scientific.net/SSP.178-179.435
2010:
Chen, Yongjun; Li, Yanjun; Walmsley, John C.; Dumoulin, S.; Skaret, Pål Christian; Roven, Hans Jørgen. (2010) Microstructure evolution of commercial pure titanium during equal channel angular pressing. Materials Science & Engineering: A. vol. 527 (3).
Chen, Yongjun; Li, Yanjun; Walmsley, John C.; Dumoulin, S; Roven, Hans Jørgen. (2010) Deformation structures of pure titanium during shear deformation. Metallurgical and Materials Transactions. A. vol. 41A (4).
Li, Yanjun; Chen, Yongjun; Walmsley, John C.; Mathiesen, Ragnvald; Dumoulin, S; Roven, Hans Jørgen. (2010) Faceted interfacial structure of {1011} twins in Ti formed during equal channel angular pressing. Scripta Materialia. vol. 62 (7).
Mathiesen, Ragnvald; Arnberg, Lars; Li, Yanjun; Snigirev, Anatoly; Snigireva, Irina; Dahle, Arne Kristian.
X-Ray Video Microscopy Studies of Irregular Eutectic Solidification Microstructures in Al-Si-Cu Alloys. ISIJ International 2010 ;Volum 50.(12) s. 1936-1940 http://www.jstage.jst.go.jp/browse/isijinternational
Dispinar, Derya; Akhtar, Shahid; Nordmark, Arne; Di Sabatino, Marisa; Arnberg, Lars.
Degassing, hydrogen and porosity phenomena in A356. Materials Science & Engineering: A 2010 ;Volum 527.(16-17) s. 3719-3725 http://dx.doi.org/10.1016/j.msea.2010.01.088
Bellmann, Martin Pawel; Meese, E. A.; Arnberg, Lars.
Impurity segregation in directional solidified multi-crystalline silicon. Journal of Crystal Growth 2010 ;Volum 312.(21) s. 3091-3095 10.1016/j.jcrysgro.2010.07.052
Brynjulfsen, Ingvild; Bakken, Astrid; Tangstad, Merete; Arnberg, Lars.
Influence of oxidation on the wetting behavior of liquid silicon on Si3N4-coated substrates. Journal of Crystal Growth 2010 ;Volum 312.(16-17) s. 2404-2410 10.1016/j.jcrysgro.2010.05.006
Delaleau, Pierre Patrick; Beckermann, Christoph; Mathiesen, Ragnvald; Arnberg, Lars.
Mesoscopic Simulation of Dendritic Growth Observed in X-ray Video Microscopy During Directional Solidification of Al-Cu Alloys. ISIJ International 2010 ;Volum 50.(12) s. 1886-1894 http://www.jstage.jst.go.jp/browse/isijinternational
Schaffer, Paul; Mathiesen, Ragnvald; Arnberg, Lars.
In situ investigations of liquid-liquid phase separation in hypermonotectic alloys. Materials Science Forum 2010 ;Volum 649. s. 149-158 10.4028/www.scientific.net/MSF.649.149
Schmidt, P; Bast, J; Aitsuradze, M; Arnberg, Lars.
Hollow castings produced by interrupted low pressure die casting. International Journal of Cast Metals Research 2010 ;Volum 23.(1) s. 1-6 10.1179/174313309X436628
2009:
Akhtar, Shahid; Arnberg, Lars; Di Sabatino, Marisa; Dispinar, D; Syvertsen, M..
A comparative study of porosity and pore morphology in a directionally solidified A356 alloy. International Journal of Cast Metals Research 2009 ;Volum 3.(1) s. 39-52 http://www.elsevier.com/wps/find/journaldescription.cws_home/504099/description#description
Akhtar, Shahid; Dispinar, D; Arnberg, Lars; Di Sabatino, Marisa.
Effect of hydrogen content, melt cleanliness and solidification conditions on tensile properties of A356 alloy. International Journal of Cast Metals Research 2009 ;Volum 22.(1-4) s. 22-25 10.1179/136404609X367245
Akhtar, Shahid; Timelli, G.; Bonollo, F.; Arnberg, Lars; Di Sabatino, Marisa.
A comparative study of defects and mechanical properties in high pressure die cast and gravity die cast aluminium alloys. International Foundry Research : Giessereiforschung 2009 ;Volum 61. s. 36-48 http://www.international-foundry-research.com/html/01about.html
Binetti, S; Libal, J; Acciarri, M; Di Sabatino, Marisa; Nordmark, Heidi; Øvrelid, E. J.; Walmsley, John C; Holmestad, Randi.
Study of defects and impurities in multicrystalline silicon grown from metallurgical silicon feedstock. Materials Science & Engineering: B. Solid-state Materials for Advanced Technology 2009 ;Volum 159-60. s. 274-277 10.1016/j.mseb.2008.05.013
Di sabatino, Marisa; Arnberg, Lars.
Castability of aluminium alloys. Transactions of the Indian Institute of Metals 2009 ;Volum 62.(4-5) s. 321-325 http://www.springerlink.com/content/251368052078247n/?p=6f64f5a681724515a138025394170cdc&pi=13
Di Sabatino, Marisa; Juel, Mari; Arnberg, Lars; Syvertsen, Martin; Tranell, Gabriella.
Control of grain size and -orientation in multi-crystalline silicon ingots. Transactions of the Indian Institute of Metals 2009 ;Volum 62.(4-5) s. 511-513
Macdonald, D.; Rougieux, F.; Cuevas, A.; Lim, B.; Schmidt, J.; Di Sabatino, Marisa; Geerligs, L.J..
Light-induced boron-oxygen defect generation in compensated p-type Czochralski silicon. Journal of Applied Physics 2009 ;Volum 105.(9) s. -
Jia, Zhihong; Arnberg, Lars; Andersen, S.J.; Walmsley, JC.
On nanoscale Al precipitates forming in eutectic Si particles in Al-Si-Mg cast alloys. Scripta Materialia 2009 ;Volum 61.(5) s. 500-503
10.1016/j.scriptamat.2009.05.009
Delaleau, Pierre; Mathiesen, Ragnvald; Schaffer, Paul; Arnberg, Lars.
Impact of buoyancy on the growth of equiaxed grains in Al-Cu. International Journal of Cast Metals Research 2009 ;Volum 22.(1-4) s. 51-53 10.1179/136404609X367326
Kvande, Rannveig; Arnberg, Lars; Martin, C..
Influence of crucible and coating quality on the properties of multicrystalline silicon for solar cells. Journal of Crystal Growth 2009 ;Volum 311.(3) s. 765-768 10.1016/j.jcrysgro.2008.09.152
Nærland, Tine Uberg; Arnberg, Lars; Holt, Arve.
Origin of the low carrier lifetime edge zone in multicrystalline PV silicon. Progress in Photovoltaics 2009 ;Volum 17.(5) s. 289-296 10.1002/pip.876
Ruvalcaba, Demian; Eskin, Dmitry; Mathiesen, Ragnvald; Arnberg, Lars; Katgerman, Laurens.
Influence of dendrite arrangement on coarsening during solidification of high-solute Al alloys. International Journal of Cast Metals Research 2009 ;Volum 22.(1-4) s. 271-274 10.1016/j.scriptamat.2009.05.009
Ruvalcaba, Demian; Mathiesen, Ragnvald; Eskin, Dmitry; Arnberg, Lars; Katgerman, Laurens.
In-situ analysis of coarsening during directional solidification experiments in high-solute aluminium alloys. Metallurgical and materials transactions. B, process metallurgy and materials processing science 2009 ;Volum 40.(3) s. 312-316
10.1179/136404609X367957
Schaffer, Paul; Mathiesen, Ragnvald; Arnberg, Lars.
Liquid decomposition, droplet coagulation and droplet-interface interactions in hypermonotectic Al-Bi alloys. Transactions of the Indian Institute of Metals 2009 ;Volum 62.(4-5) s. 437-442 10.1016/j.actamat.2009.02.041
Schaffer, Paul; Mathiesen, Ragnvald; Arnberg, Lars.
L2 droplet interaction with alpha-Al during solidification of hypermonotectic Al–8 wt.% Bi alloys. Acta Materialia 2009 ;Volum 57.(10) s. 2887-2895 10.1016/j.actamat.2009.02.041
2008:
Kvande, Rannveig; Geerlings, L. J.; Coletti, G.; Arnberg, Lars; Di Sabatino, Marisa; Øvrelid, E. J.; Swanson, C. C..
Distribution of iron in multicrystalline silicon ingots. Journal of Applied Physics 2008 ;Volum 104.(6) s. - 10.1063/1.2956697
Di Sabatino Lundberg, Marisa; Arnberg, Lars; Apelian, Diran.
Progress in the understanding of fluidity of aluminium foundry alloys. International Journal of Cast Metals Research 2008 ;Volum 2.(3) s. 17-27
Akhtar, Shahid; Arnberg, Lars; Di Sabatino, Marisa; Dispinar, D.; Syvertsen, M..
A comparative study of porosity and pore morphology in a directionally solidified A356 alloy. International Journal of metalcasting 2008 ;Volum 3. s. 39-52
Schaffer, Paul; Mathiesen, Ragnvald; Arnberg, Lars; Di Sabatino, Marisa; Snigirev, Anatoly.
In situ investigation of spinodal decomposition in hypermonotectic Al–Bi and Al–Bi–Zn alloys. New Journal of Physics 2008 ;Volum 10. s. http://hdl.handle.net/11250/2356231
Coletti, G.; Kvande, Rannveig; Michailetchi, V, D; Geerilings, L. J.; Arnberg, Lars; Øvrelid, E. J..
Effect of iron in silicon feedstock on p- and n-type multicrystalline silicon solar cells. Journal of Applied Physics 2008 ;Volum 104.(10) s. - 10.1063/1.3021355
Jia, Zhihong; Arnberg, Lars.
Nanobelts in multicomponent aluminium alloys. Applied Physics Letters 2008 ;Volum 93. s. - 10.1063/1.2978405
Timelli, Giulio; Lohne, Otto; Arnberg, Lars; Laukli, Hans Ivar.
Effect of solution heat treatments on the microstructure and mechanical properties of a die-cast AlSi7MgMn alloy. Metallurgical and Materials Transactions. A 2008 ;Volum 39A. s. 1747-1758 10.1007/s11661-008-9527-0
2007:
Pettersen, Tanja; Li, Yanjun; Furu, Trond; Marthinsen, Knut.
Effect of changing homogenization treatment on the particle structure in Mn-containing aluminium alloys. Materials Science Forum 2007 ;Volum 558-559. s. 301-306 http://www.ttp.net/0255-5476.html
Arnberg, Lars; Mathiesen, Ragnvald H..
The real-time, high-resolution x-ray, video microscopy of solidification in aluminum alloys. JOM: The Member Journal of TMS 2007 ;Volum 59.(8) s. 20-26
Ruvalcaba, Demian; Mathiesen, Ragnvald H.; Eskin, Dmitry; Arnberg, Lars; Katgerman, Lorents.
In situ observations of dendritic fragmentation due to local solute-enrichment during directional solidification of an aluminum alloy. Acta Materialia 2007 ;Volum 55. s. 4287-4292 10.1016/j.actamat.2007.03.030
2006:
Heng, Chenglin; Li, Yanjun; Mayandi, Jeyanthinath; Finstad, Terje; Jørgensen, Sissel; Gunnæs, Anette Eleonora; Olsen, Arne; Storås, P..
A study on the precipitation of Ge-rich nanoparticles in a luminescent (Er, Ge) co-doped SiO2 film sputtered with Ar+O2 plasma. International Journal of Nanoscience2006 ;Volum 5.(4-5) s. 493-498 doi:10.1142/S0219581X06004681
Klaveness, Arne; Vajeeston, Ponniah; Ravindran, Ponniah; Fjellvåg, Helmer; Li, Yanjun; Kjekshus, Arne.
Structural phase stability and bonding behavior of BAlH5 (B=Mg,Ba) from first-principles calculations. Physical Review B. Condensed Matter and Materials Physics2006 ;Volum 73.
Li, Yanjun; Brusethaug, S; Olsen, Arne.
Influence of Cu on the mechanical properties and precipitation behavior of AlSi7Mg0.5 alloy during aging treatment. Scripta Materialia 2006 ;Volum 54. s. 99-103
Di Sabatino, Marisa; Arnberg, Lars; Brusethaug, Stig; Apelian, Diran.
Fluidity evaluation methods for Al-Mg-Si alloys. International Journal of Cast Metals Research 2006 ;Volum 19.(2) s. 94-97
Grab, T.; Arnberg, Lars.
Influence of TiB2 particles on growth of eutectic silicon in aluminium-silicon alloys. International Journal of Cast Metals Research 2006 ;Volum 19.(4) s. 201-209
Magnabosco, I; Ferro, P; Bonollo, Franco; Arnberg, Lars.
An investigation of fusion zone microstructures in electron beam welding of copper-stainless steel. Materials Science & Engineering: A 2006 ;Volum A424.(1-2) s. 161-173 http://www.elsevier.com/wps/find/journaldescription.cws_home/504098/description#description
Mathiesen, Ragnvald; Arnberg, Lars.
Time-resolved X-ray imaging studies of advanced alloy solidification processes. Advances in X-Ray Analysis 2006 ;Volum 49. s. 37-45
Mathiesen, Ragnvald; Arnberg, Lars.
X-ray monitoring of solidification phenomena in Al-Cu alloys. Materials Science Forum 2006 ;Volum 508. s. 69-74
Mathiesen, Ragnvald; Arnberg, Lars; Bleuet, P; Somogyi, A.
Crystal fragmentation and columnar-to-equiaxed transitions in Al-Cu studied by syncrotron X-ray video microscopy. Metallurgical and Materials Transactions. A 2006 ;Volum 37A.(8) s. 2515-2524
Schaffer, Paul; Arnberg, Lars; Dahle, Arne K..
Segregation of particles and its influence on the fluidity of an Al-7wt%Si alloy. Scripta Materialia 2006 ;Volum 54.(4) s. 677-682 http://www.ttp.net/0255-5476.html
2005:
Li, Yanjun; Brusethag, S.; Olsen, Arne.
Influence of Cu on the Aging Behavior of AlSi7Mg0.5 Alloy. TMS Letters 2005 ;Volum 2.(2) s. 45-46
Li, Yanjun; Olsen, Arne; Johansen, A.; Arnberg, L..
TEM Study on the Eutectoid Phase Transformation of Intermetallic Particles from Al6(Fe,Mn)to a-Al(Mn,Fe)Si Phase in AA3003 Alloy. TMS Letters 2005 ;Volum 2.(2) s. 35-36
Heng, Chenglin; Finstad, Terje; Li, Yanjun; Gunnæs, Anette Eleonora; Olsen, Arne; Storås, Preben.
Ge nanoparticle formation and photoluminescence in Er doped SiO2 films: influence of sputter gas and annealing. Microelectronics Journal 2005 ;Volum 36. s. 531-535
Di, Sabatino Marisa; Arnberg, Lars; Bonollo, Franco.
Simulation of fluidity in Al-Si alloys. Metallurgical Science and Technology 2005 ;Volum 23.(1) s. 3-10
Di, Sabatino Marisa; Arnberg, Lars.
Effect of grain refinement and dissolved hydrogen on the fluidity of A356 alloy. International Journal of Cast Metals Research 2005 ;Volum 18.(3) s. 181-186
Di Sabatino, Marisa; Arnberg, Lars; Rørvik, Stian; Prestmo, Asbjørn.
The influence of oxide inclusions on the fluidity of an Al-7wt%Si alloy. Materials Science & Engineering: A 2005 ;Volum 413-414. s. 272-276 http://www.elsevier.com/wps/find/journaldescription.cws_home/504098/description#description
Di Sabatino, Marisa; Syvertsen, Freddy; Arnberg, Lars; Nordmark, Arne.
An improved method for fluidity measurement by gravity casting of spirals in sand moulds. International Journal of Cast Metals Research 2005 ;Volum 18.(1) s. 59-62
Helenius, Raimo; Lohne, Otto; Arnberg, Lars; Laukli, Hans Ivar.
The heat transfer during filling of a high-pressure die-casting shot sleeve. Materials Science & Engineering: A 2005 ;Volum 413-414. s. 52-55 10.1016/j.msea.2005.08.166
Laukli, Hans Ivar; Arnberg, Lars; Lohne, Otto.
Effects of grain refiner additions on the grain structures in HPDC A356 castings. International Journal of Cast Metals Research 2005 ;Volum 18.(2) s. 65-72
Mathiesen, Ragnvald; Arnberg, Lars.
Stray crystal formation in Al-20wt.% Cu studied by synchrotron X-ray video microscopy. Materials Science & Engineering: A 2005 ;Volum 413-414. s. 283-287 http://www.elsevier.com/wps/find/journaldescription.cws_home/504098/description#description
Mathiesen, Ragnvald; Arnberg, Lars.
X-radiography observations of columnar and dendritic growth and constitutional undercooling in an Al-30 wt% Cu alloy. Acta Materialia 2005 ;Volum 53.(4) s. 947-956 http://www.elsevier.com/wps/find/journaldescription.cws_home/221/description#description
2004:
Dons, A. L.; Li, Yanjun; Marioara, C.; Siemensen, C.; Johansen, A.; Hakonsen, A.; Arnberg, Lars; Benum, S..
Precipitation and dissolution of Mn-rich dispersoids during the heating of AA3xxx alloys. Aluminium 2004 ;Volum 80.(6) s. 578-583
Heng, Chenglin; Finstad, Terje; Storås, Preben; Li, Yanjun; Gunnæs, Anette Eleonora; Nilsen, Ola. (2004) The 1.54 µm photoluminescence from an (Er,Ge) co-doped SiO2 film deposited on Si by rf magnettron sputtering.Applied Physics Letters. vol. 85 (19).
Li, Yanjun; Arnberg, Lars.
Phase selection and phase transformation in eutectic iron-bearing particles in a DC-cast AA5182 alloy. Materials Forum (CD-ROM) 2004 ;Volum 28. s. 998-1003
Li, Yanjun; Johansen, A.; Benum, S.; Siemensen, C.; Dons, A. L.; Hakonsen, A.; Arnberg, Lars.
Evolution of the microstructures in a DC-cast AA3003 alloy during heat treatment. Aluminium 2004 ;Volum 80.(6) s. 578-573
Li, Yanjun; Arnberg, Lars. (2004) A eutectoid phase transformation for the primary intermetallic particle from Alm(Fe,Mn) to Al3(Fe,Mn)in AA5182 alloy . Acta Materialia. vol. 52 (10).
Li, Yanjun; Arnberg, Lars. (2004) Solidification structures and phase selection of iron-bearing eutectic particles in a DC-cast AA5182 alloy. Acta Materialia.vol. 52 (9).
Di sabatino, Marisa; Arnberg, Lars.
A review on the fluidity of Al based alloys. Metallurgical Science and Technology 2004 ;Volum 22.(1) s. 9-15
Grasso, P.-D.; Commet, B.; Drezet, J.-M.; Ju, Yuxiu; Arnberg, Lars; Rappaz, M..
Small scale experiments on coalescence in aluminium alloys. Aluminium 2004 ;Volum 80.(6) s. 572-578
Heiberg, G; Gandin, CA; Goerner, Harald; Arnberg, Lars; Görner, Harald.
Experimental and modeling studies of the thermal conditions and magnesium, iron, and copper content on the morphology of the aluminum silicon eutectic in hypoeutectic aluminum silicon alloys. Metallurgical and Materials Transactions. A 2004 ;Volum 35A. s. 2981-2991
Mjøs, Øyvind; Stokkan, Gaute; Søiland, Anne Karin; Arnberg, Lars.
Mapping of Silicon Carbide and Silicon Nitride Precipitates on Chemical-Mechanically Polished MC-Silicon Wafers. Proceedings/ European Photovoltaic Solar Energy Conference 2004 s. 804-807
2003:
Li, Yanjun; Arnberg, Lars. (2003) Evolution of eutectic intermetallic particles in DC-cast AA3003 alloy during heating and homogenization. Materials Science and Engineering. vol. A347.
Li, Yanjun; Arnberg, Lars.
Precipitation of dispersoids in DC-cast AA3103 alloy during heat treatment. Light Metals 2003 s. 991-997
Li, Yanjun; Arnberg, Lars. (2003) Quantitative study in the precipitation behavior of dispersoids in DC-cast AA3003 alloy during heating and homogenization. Acta Materialia. vol. 51.
Arnberg, Lars; Mo, Asbjørn.
Norlight shaped castings - Fundamenal research applied to industrial problems. Proceedings of the 1st Int. Light Metals Technology Conf. 2003
Isac, Sorin; Arnberg, Lars; Nygren, Mats.
Spark Plasma Sintering of Iron Powder Embedded in Conductive and Non-Conductive Pressure Media. Advances in Powder Metallurgy & Particulate Materials : proceedings 2003
Isac, Sorin; Arnberg, Lars; van der Eijk, Casper; Sallom, Zuhair Kamil.
Experimental investigation on the layer-by-layer ERS (Electric Resistance Sintering) of iron NC100.24 powder. Advances in Powder Metallurgy & Particulate Materials : proceedings 2003
Laukli, Hans Ivar; Lohne, Otto; Sannes, Stian; Arnberg, Lars; Gjestland, Haavard.
Investigations of the Grain Size Distribution in a Complex AM60 Magnesium Alloy Die casting. International Journal of Cast Metals Research 2003 ;Volum 16.(6)
Mathiesen, Ragnvald; Arnberg, Lars.
In-situ experimental observations of dendritic growth in alcu-alloys. International Conference on Modeling of Casting, Welding and Advanced Solidification Processes2003
MHamdi, M.; Magnussen, T.; Pequet, C.; Arnberg, Lars; Rappaz, Michel.
Porosity formation in directional solidification of an Al-7%Si alloy. International Conference on Modeling of Casting, Welding and Advanced Solidification Processes2003
Ju, Yuxiu; Arnberg, Lars.
Measurement of grain bridging in some Al-Cu and Al-Sn alloys. International Journal of Cast Metals Research 2003 ;Volum 16. s. 522-530
Laukli, Hans Ivar; Lohne, Otto; Sannes, S; Gjestland, H; Arnberg, Lars.
Grain size distribution in a complex AM60 magnesium alloy die casting. International Journal of Cast Metals Research 2003 ;Volum 16. s. 515-521
2002:
Li, Yanjun; Arnberg, Lars. Solidification structure of DC-Cast AA3003 alloy and its influence on homogenization. Aluminium, 2002,Vol. 78, No10, pp. 834-839