Jens Christofer Werenskiold
+4799297837
Kjemi 1, 325, Gløshaugen
Publications
2024
-
Langelandsvik, Geir;
Skorpen, Kristian Grøtta;
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2024)
Review of Metal Screw Extrusion: State of the Art and Beyond.
Metals
Academic literature review
2023
-
Kirkbakk, Kjell Martin;
Marhaug, Nikolai;
Langelandsvik, Geir;
Werenskiold, Jens Christofer.
(2023)
Grain refinement of aluminium welds by Ti, TiB2, and TiC filler wire inoculation.
The International Journal of Advanced Manufacturing Technology
Academic article
-
Simen, Skurdal;
Kvam-Langelandsvik, Geir;
Werenskiold, Jens Christofer.
(2023)
Characterization of Aluminium TiC nano-composite filler wire inoculated weld metal.
NTNU Open
Masters thesis
-
Samuelsen, Steffen;
Kvam-Langelandsvik, Geir;
Werenskiold, Jens Christofer.
(2023)
Effect of TiC nanoparticle addition in metal screw extruded AA7108 filler wire.
NTNU Open
Masters thesis
2022
-
Kirkbakk, Kjell Martin;
Kvam-Langelandsvik, Geir;
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2022)
Aluminum weld metal inoculation by Ti/TiB2/TiC additions to screw extruded filler wires.
NTNU Open
Masters thesis
2008
-
Roven, Hans Jørgen;
Liu, Manping;
Werenskiold, Jens Christofer.
(2008)
Dynamic precipitation during severe plastic deformation of an Al–Mg–Si aluminium alloy.
Materials Science & Engineering: A
Academic article
-
Liu, Manping;
Roven, Hans Jørgen;
Yu, Yingda;
Werenskiold, Jens Christofer.
(2008)
Deformation structures in 6082 aluminium alloy after severe plastic deformation by equal-channel angular pressing.
Materials Science & Engineering: A
Academic article
2006
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2006)
On the Grain Refinement Mechanisms in SPD - Applying High Resolution Electron Microscopy and the LEDS Approach.
Materials Science Forum
Academic article
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2006)
Understanding the Textural and Microstructural Development in Two-Pass ECAP by Route A of a Commercial Aluminium Alloy.
NATO Science Series : Sub-Series II, Mathematics, Physics and Chemistry
Academic article
2005
-
Dumoulin, Stephane;
Roven, Hans Jørgen;
Werenskiold, Jens Christofer;
Valberg, Henry Sigvart.
(2005)
Finite element modeling of equal channel angular pressing: Effect of material properties, friction and die geometry.
Materials Science & Engineering: A
Academic article
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2005)
Microstructure and texture evolution during ECAP of an AlMgSi alloy: Observations, mechanisms and modeling.
Materials Science & Engineering: A
Academic article
-
Roven, Hans Jørgen;
Nesbø, Håkon;
Werenskiold, Jens Christofer;
Seibert, Tanja.
(2005)
Mechanical properties of aluminium alloys processed by SPD: Comparison of different alloy systems and possible product areas.
Materials Science & Engineering: A
Academic article
2004
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2004)
Equal Channel Angular Prfessing (ECAP) od AA6082: Mechanical Properties, Texture and Microstructural Development.
Doktoravhandlinger ved NTNU
Doctoral dissertation
Journal publications
-
Langelandsvik, Geir;
Skorpen, Kristian Grøtta;
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2024)
Review of Metal Screw Extrusion: State of the Art and Beyond.
Metals
Academic literature review
-
Kirkbakk, Kjell Martin;
Marhaug, Nikolai;
Langelandsvik, Geir;
Werenskiold, Jens Christofer.
(2023)
Grain refinement of aluminium welds by Ti, TiB2, and TiC filler wire inoculation.
The International Journal of Advanced Manufacturing Technology
Academic article
-
Roven, Hans Jørgen;
Liu, Manping;
Werenskiold, Jens Christofer.
(2008)
Dynamic precipitation during severe plastic deformation of an Al–Mg–Si aluminium alloy.
Materials Science & Engineering: A
Academic article
-
Liu, Manping;
Roven, Hans Jørgen;
Yu, Yingda;
Werenskiold, Jens Christofer.
(2008)
Deformation structures in 6082 aluminium alloy after severe plastic deformation by equal-channel angular pressing.
Materials Science & Engineering: A
Academic article
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2006)
On the Grain Refinement Mechanisms in SPD - Applying High Resolution Electron Microscopy and the LEDS Approach.
Materials Science Forum
Academic article
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2006)
Understanding the Textural and Microstructural Development in Two-Pass ECAP by Route A of a Commercial Aluminium Alloy.
NATO Science Series : Sub-Series II, Mathematics, Physics and Chemistry
Academic article
-
Dumoulin, Stephane;
Roven, Hans Jørgen;
Werenskiold, Jens Christofer;
Valberg, Henry Sigvart.
(2005)
Finite element modeling of equal channel angular pressing: Effect of material properties, friction and die geometry.
Materials Science & Engineering: A
Academic article
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2005)
Microstructure and texture evolution during ECAP of an AlMgSi alloy: Observations, mechanisms and modeling.
Materials Science & Engineering: A
Academic article
-
Roven, Hans Jørgen;
Nesbø, Håkon;
Werenskiold, Jens Christofer;
Seibert, Tanja.
(2005)
Mechanical properties of aluminium alloys processed by SPD: Comparison of different alloy systems and possible product areas.
Materials Science & Engineering: A
Academic article
Report
-
Simen, Skurdal;
Kvam-Langelandsvik, Geir;
Werenskiold, Jens Christofer.
(2023)
Characterization of Aluminium TiC nano-composite filler wire inoculated weld metal.
NTNU Open
Masters thesis
-
Samuelsen, Steffen;
Kvam-Langelandsvik, Geir;
Werenskiold, Jens Christofer.
(2023)
Effect of TiC nanoparticle addition in metal screw extruded AA7108 filler wire.
NTNU Open
Masters thesis
-
Kirkbakk, Kjell Martin;
Kvam-Langelandsvik, Geir;
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2022)
Aluminum weld metal inoculation by Ti/TiB2/TiC additions to screw extruded filler wires.
NTNU Open
Masters thesis
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2004)
Equal Channel Angular Prfessing (ECAP) od AA6082: Mechanical Properties, Texture and Microstructural Development.
Doktoravhandlinger ved NTNU
Doctoral dissertation
Teaching
Courses
Knowledge Transfer
2023
-
Academic lectureWerenskiold, Jens Christofer; Skorpen, Kristian Grøtta; Langelandsvik, Geir. (2023) Metal Screw Extrusion, state of the art and beyond. NTNU 5th International Conference on Light Materials - Science and Technology , Trondheim 2023-06-21 - 2023-06-23
2009
-
PosterCui, Jirang; Werenskiold, Jens Christofer; Roven, Hans Jørgen. (2009) New approaches for recycling of aluminum scraps. TMS International Symposium on Liquid Metal Processing and Casting Conference , Santa Fe 2009-09-20 - 2009-09-23
2006
-
Academic lectureRoven, Hans Jørgen; Liu, Manping; Werenskiold, Jens Christofer. (2006) Dynamic precipitation during severe plastic deformation of an Al-Mg-Si aluminium alloy. Xi'an Jiaotong University The 14th Int. Conference on Strength of Materials (ICSMA14) , Xian 2006-06-04 - 2006-06-09
-
Academic lectureLiu, Manping; Roven, Hans Jørgen; Yu, Yingda; Werenskiold, Jens Christofer. (2006) Deformation structures in 6082 aluminium alloy after severe plastic deformation by ECAP. Xi'an Jiaotong University The 14th Int. Conference on Strength of Materials (ICSMA 14) , Xian 2006-06-04 - 2006-06-09
2005
-
PosterErlien, Tomas Laugsand; Werenskiold, Jens Christofer; Lilleby, Anders; Grong, Øystein; Roven, Hans Jørgen. (2005) Continuous Severe Plastic Deformation of Al-Mg-Si Alloys. Dept. of Materials Science and Engineering, Kyushu Universit NanoSPD3- Nanomaterials by Severe Plastic Deformation , Fukuoka 2005-09-22 - 2005-09-26
-
Academic lectureRoven, Hans Jørgen; Nesbø, Håkon; Sandberg, Håkon; Werenskiold, Jens Christofer. (2005) Aluminium Alloys subjected to SPD - An Evaluation of Achieved Mechanical Properties. Dept. Materials Science and Engineering, Kyushu University NanoSPD3- Nanomaterials by Severe Plastic Deformation , Fukuoka 2005-09-22 - 2005-09-26
2004
-
Academic lectureRoven, Hans Jørgen; Werenskiold, Jens Christofer; Dumoulin, Stephan. (2004) Measuring 3D Strains in Equal Channel Angular Pressing. TMS TMS Annual Meeting , Charlotte, North Carolina 2004-03-14 - 2004-04-18
-
Academic lectureNesbø, Håkon; Werenskiold, Jens Christofer; Roven, Hans Jørgen. (2004) Mekaniske Egenskaper i Aluminium etter ECAP. Norsk Metallurgisk Selskap Norsk Metallurgisk Sommermøte 2004 , Britannia Hotell, Trondheim 2004-05-05 - 2004-05-06
-
Academic lectureDumoulin, Stephane; Roven, Hans Jørgen; Werenskiold, Jens Christofer. (2004) Quasi-3D Strain Analyses in Equal Channel Angular Pressing. The 8th Int. Conf. on Numerical Methods in Industrial Forming NUMIFORM-8 , Columbus, Ohio 2004-06-14 - 2004-06-17
-
PosterRoven, Hans Jørgen; Werenskiold, Jens Christofer. (2004) Conventional Light Alloys towards the Bottom - a Physical Metallurgical Approach. Research Council of Norway NANOMAT Conference , Oslo 2004-06-03 - 2004-06-04
2002
-
Academic lectureRoven, Hans Jørgen; Werenskiold, Jens Christofer. (2002) Status on the ECAP activity in FORMLAB - an enabling technology for the next Generation of Light Alloys?. Compform Steering Committee Compform Technical Seminar , Royal Garden Hotel, Trondheim 2002-11-21 - 2002-11-22
-
Academic lectureWerenskiold, Jens Christofer; Roven, Hans Jørgen. (2002) Ny formingsteknologi: Equal Channel Angular Pressing, ECAP. Norsk Metallurgisk Forening Norsk Metallurgisk Sommermøte , Oslo 2002-05-23 - 2002-05-24
-
PosterWerenskiold, Jens Christofer; Roven, Hans Jørgen. (2002) Strain Measurements in the ECAP Process. Nanomaterials by Severe Plastic Deformation - NANOSPD2 , Vienna 2002-12-09 - 2002-12-13